Sdc S6100 SERIES REVERSIBLE PANIC/FIRE EXIT Manual de usuario descargar pdf (Pagina 10)

P:\INSTALLATION INST\Mechanical Hardware\INST-S6200.vsd Rev - 01-11 Page 6

STEP 4: INSTALL TOP ROD AND TOP STRIKE

1. Mount the top latch assembly into the mounting bracket (see figure 7).

2. Screw the threaded end of the top rod onto the top latch assembly completely (see figure 8).

Threaded end

of top rod

Figure 7

Figure 8

3. Measure and cut the length of the top rod. The length of the top rod is measured to the edge of

the rod connector (see figure 9) which will be attached to the chassis.

4. Insert the rod connector into the non-threaded end of the top rod and secure in place by

tightening the locking screw (see figure 10).

5. With the top rod connector installed, attach the top rod to the chassis at the location indicated

by the arrow (see figure 11).

Edge of rod

connector

Mark cutting line

and cut top rod

Figure 9

Non-threaded

end of top rod

Locking

screw

Figure 10

Figure 11

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 22 23

Sin comentarios

Sdc S6100 SERIES REVERSIBLE PANIC/FIRE EXIT Manual de usuario Pagina 10